Need help?Do you have a question about the Ansul AUTOPULSE IQ-301 and is the answer not in the manual?
General| Brand | Ansul |
|---|---|
| Model | AUTOPULSE IQ-301 |
| Category | Fire Alarms |
| Language | English |
Explains how smoke detectors may fail to detect fires due to environmental factors or placement.
Covers limitations related to electrical power supply and component compatibility.
Warnings for electrical connections, power sources, and proper grounding.
Guidance on operating environment, component care, and static discharge prevention.
Overview of the control panel and its capabilities.
Details the physical parts of the system including panels, modules, and power.
Describes the core hardware units: CPU board, cabinet, LCD, and batteries.
Steps to take before installing the system, including unpacking and location selection.
A step-by-step checklist for installing, wiring, and testing system components.
Instructions for connecting AC and DC power sources to the control panel.
Core procedure for wiring the Signaling Line Circuit.
Introduction to the control panel's programming capabilities.
Overview of configurable program settings for system behavior.
Step-by-step guide to accessing and navigating program change mode.
Introduction to operating the control panel and its functions.
Procedures for operating the panel in various conditions like normal, alarm, or trouble.
Describes panel behavior and functions during normal operation.
How the panel indicates and operates during a fire alarm condition.
Procedure for calculating AC branch circuit requirements.
Method for calculating the total system current draw under various conditions.
How to calculate the required battery size for system backup.
Instructions for programming the four software releasing zones.
Details on functions available within releasing zones.
Steps for installing a combination fire/burglary system.
Programming the control panel for security functions.
Critical wiring requirements for the Signaling Line Circuit.
Guidelines for UL power-limited and nonpower-limited wiring.
Illustrates typical wiring separation for power-limited circuits.
Instructions on how to program Control-By-Event functions.
Instructions for mounting the CHG-120 charger in various cabinets.
Instructions for connecting the CHG-120 charger to the IQ-301 panel.
To Next Page
