Page 10 of 39 Technical Documentation ECE10CM, DC10CM
2.3 Operator Responsibilities
Responsibilities of the operator or safety officer:
♦ to ensure adherence to all relevant directives, instructions and laws,
♦ to ensure that only qualified personnel operate on or with the drive regulator,
♦ to ensure that the operating manual is available to all personnel.
2.4 Personnel
Only qualified personnel may work on or with the regulator.
2.5 Drive Regulator
Only operate the drive regulator in faultless condition. The authorized operating conditions
and power limits are to be adhered to.
Retrofitting, modification or conversion of the drive regulator is prohibited. Any of these must
first be discussed with the manufacturer. The drive regulator is a device for use in industrial,
high-voltage systems. All covers must be in place during operation to prevent the possibility
of electrical shock.
To Next Page
Loading...
Need help?
General