Technical Documentation ECE10CM, DC10CM Page 3 of 39
Contents:
Page
1. GENERAL INFORMATION 5
1.1 MANUFACTURER 5
1.2 SHIPPING CONTENTS 5
1.3 UNIVERSAL SMALL CONVERTER 5
1.3.1 SHORT DESCRIPTION 6
1.3.2 RECOMMENDED UTILISATION 7
1.3.3 DISCLAIMER 7
1.3.4 DEFINITIONS 8
2. SAFETY 9
2.1 GENERAL SAFETY INFORMATION 9
2.2 OPERATING MANUAL 9
2.3 OPERATOR RESPONSIBILITIES 10
2.4 PERSONNEL 10
2.5 DRIVE REGULATOR 10
3. TECHNICAL DATA 11
3.1 GENERAL DATA / OPERATING CONDITIONS 11
3.2 ECE10CM, DC10CM RATING DATA 12
3.3 DIMENSIONS 13
3.4 HEAT SINK DIMENSIONS 13
4. INSTALLATION 14
4.1 MECHANICAL INSTALLATION 14
4.2 ELECTRICAL INSTALLATION 14
4.3 INFORMATION ON EMC 15
4.4 CONNECTION 16
4.4.1 MAINS 16
4.4.2 MOTOR CONNECTION 16
4.4.3 INTERCONNECTED OPERATION OF SEVERAL DRIVE CONTROLS 17
4.4.4 BALLAST RESISTOR CONNECTION 18
4.4.5 CONTROL CONNECTIONS 19
4.4.6 SIGNALLING OUTPUTS 21
4.4.7 AUXILIARY VOLTAGES 21
4.4.8 FEEDBACK SYSTEMS 22
5. SERVICE - INFORMATION 26
5.1 DISPLAYS 26
5.2 MEASURING POINTS 27
5.3 TRIMMER 27
5.4 ENCODING 31
To Next Page
Loading...