Technical Documentation ECE10CM, DC10CM Page 9 of 39
2. Safety
2.1 General Safety Information
The drive regulator was state-of-the-art at the time of delivery and is considered principally
safe to operate. The drive regulator may present certain dangers to personnel, the drive
regulator or other assets of the operator when
♦ non-qualified personnel work on or with the drive regulator,
♦ Operation of the regulator in other mountings or connections, other than described in this
manual.
Then exists danger for:
♦ Persons
♦ The drive regulator
♦ Other real value of the operator
The drive regulator must be considered in the planning to ensure that the devices safely
fulfill their intended purpose when correctly installed and operated. This also applies in
combination with the complete system.
Take precautions to ensure that no damage may occur in the event of a malfunction of the
drive regulator through the use of:
♦ additional devices to override the function of the regulator
♦ electrical or mechanical safety devices
♦ complete system measures
Ensure that no material damages may occur in the event of a regulator fault by implementing
the proper safety measures.
2.2 Operating Manual
This operating manual contains safety instructions for correct operation on and of the drive
regulator, they are to be followed.
In addition to the general safety instructions contained in this chapter, the instructions
contained in the manual text must also be followed.
No claim is made that the safety instructions are complete. Please contact the manufacturer
in the event of questions or problems.
This manual must be available to all persons who work on or with the drive regulator and
must remain in good, readable condition.
To Next Page
Loading...
Need help?
General