Technical Documentation ECE10CM, DC10CM Page 5 of 39
1. General Information
1.1 Manufacturer
ANTEK GmbH
Im Köchersgrund 1
71717 Beilstein
+49 7062 94060
+49 7062 940620
info@antek-online.de
www.antek-online.de
1.2 Shipping Contents
The following are shipped with the unit:
♦ 1 Drive Regulator ECE10CM-xx resp. DC10CM-xx
♦ 1 Operating Manual
♦ all necessary connectors
Upon receipt, examine the contents for completeness. The manufacturer,
ANTEK – Antriebstechnik GmbH, assumes no liability for later shortage claims.
1.3 Universal Small Converter
The Universal Small Converter (UNIKUM) is a 4 quadrant drive control. It is specifically
designed to fulfil the demands of quiet running and dynamics. The converter is built for direct
connection to the 230 V~ mains. The intermediate circuit voltage connections are to plug-in
terminals and there can be a free exchange of energy with several converters in
interconnected operation.
The converter can be adapted to different types of motors by using different component
variants. The details on the rating plate will vary depending on the component variant of the
converter:
♦ ECE10CM-xx Converter for permanently excited three-phase synchronous motors
♦ DC10CM-xx Converter for permanently excited DC motors
Thanks to a large variety of feedback systems it is possible to produce the optimum design of
converter with regard to control accuracy and using the necessary technical expertise to solve
the problems of a variable-speed drive.
To Next Page
Loading...
Need help?
General