To have a good power accurate and functional experience, please adjust it according to the maximum output power of your radio station, please refer to the advanced
wave value.
Operate Chapter 3.6 to adjust ÿFIX RADIOÿto modify the radio type.
1) Antenna feeder system
If the power and standing wave values displayed by the radio station are inconsistent with the values displayed by the tuner, please take the radio station as the standard.
When using this antenna adjustment product, please check the antenna feed system to ensure that the antenna feed system has a good grounding.
The setting of this radio type will not affect or damage the components of the tuner, but only affect the power detection algorithm and the correlation within the tuner system.
According to customer feedback, a good antenna feeder grounding can greatly improve the tuning ability of this product, and can provide you with a pleasant communication experience.
Function interface maximum value.
2) Power supply instructions
4) Adjustment calibration
This product supports USB, built-in lithium battery power supply, under normal circumstances please use the built-in lithium battery or USB power supply up to
When this product leaves the factory, the power and standing wave value algorithm curve of the tuner has been calibrated, and the 100W mode uses FT891
to a stable voltage requirement.
Radio calibration, 10W mode uses ICOM705 calibration.
3) Set the radio type
After changing the use environment, antenna feeder, and radio station, there may be differences between the actual output power and the power and standing wave value displayed by the antenna.
The default factory configuration radio type of this product is 100W mode, and the optional parameter is 100w or 10w. to bring you
Deviation, please refer to chapter 3.6 of advanced operation to adjust [ FIX PWR ] and [ FIX SWR ] values to calibrate the power, dwell
ANTUNER only researches ultra-small, portable radio peripherals, and completely develops software and hardware at the bottom
http://www.antuner.com
BI3QWQ
2.2 Precautions when using the tuner for the first time
Machine Translated by Google
To Next Page
Loading...
