v1.22.5f (May 10, 2022)
v1.22.5g (May 19, 2022)
v1.22.5h (May 29, 2022)
v1.22.6a (June 7, 2022)
v1.22.5e (April 30, 2020, major upgrade)
v1.22.5ad (April 23, 2022)
BI3QWQ
http://www.antuner.com
ANTUNER only researches ultra-small, portable radio peripherals, and completely develops software and hardware at the bottom
2. Add 10 sets of automatic storage tuning results, greatly improving the tuning speed.
1. Fix the problem that the FIX PWR algorithm does not take effect.
3. Add support for AT-100M second-generation motherboard.
overflow caused.
ÿ
2. In this upgrade, the relay test function interface will be entered by default when the device is turned on for the first time.
1. When the corrected power is greater than 60-70 watts, the power is suddenly displayed as 20
1. Modify TUNE MIN ADC to default value 10 (0.1w), range 5-50, step 5. previous version
1. Solve the problem that it cannot be tuned after 1 tuning, and it needs to be restarted before it can be tuned
30 watts BUG, is due to MCU memory
The software defaults to 50 (about 5w), and some QRP radio stations need to be manually set to 10. This modification is directly factory defaulted to 10
1. Optimize variables and compress the overall code usage space.
ÿ
1. Improve the response speed of the relay, and set the TUNE DELAY parameter to 26ms by default
ÿ
Machine Translated by Google
To Previous Page
Loading...