EasyManua.ls Logo

ANTUNER AT-100M - Technical Specifications

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Product weight: 370g
Supported stations: Kenbu, ICOM, Yaesu, Xiegu, USDX
Working current: USB 5V/Max 3W
Charging current: USB 5V 1A (supports over-discharge and over-charge protection)
, QRP and any other station
Support antenna: dipole, GP, long line, end-fed, Yagi and vehicle short-wave antenna, etc.
Battery capacity: 3300mAh
Frequency range: 1.8MHz-30MHz
Shutdown current: about 15ÿA
Support mode: 1-18MHz or SSB/CW
Standby time: about 13mA, about 150~200 hours of standby (without any tuning action)
0.1W-100W
Tuning state: start 1~3 relays consume current 130~330mA, about 10~25 hours standby time
18-30MHz or FM/AM/FT8 0.1W-50W
Charging time: about 4 hours, the LED indicator is red when charging, and green when fully charged
Appearance size: 13.9cm x 7.4cm x 2.9cm
http://www.antuner.com
ANTUNER only researches ultra-small, portable radio peripherals, and completely develops software and hardware at the bottom
BI3QWQ
1.2 Product performance
Machine Translated by Google

Table of Contents

Other manuals for ANTUNER AT-100M