Need help?Do you have a question about the APC RT and is the answer not in the manual?
General| Nominal Output Voltage | 230V |
|---|---|
| Topology | Double Conversion Online |
| Input Voltage Range | 160 - 286 V |
| Nominal Input Voltage | 230V |
| Transfer Time | 0 ms |
| Emergency Power Off (EPO) | Yes |
| Output Frequency | 50/60 Hz +/- 3 Hz |
| Wave Type | Sine wave |
| Battery Type | Sealed Lead-Acid (SLA) |
| Interface Ports | USB |
| Audible Alarm | Alarm when on battery |
| Type | UPS |
| Form Factor | Rack/Tower convertible |
| Dimensions | 432 x 482 x 89 mm (17 x 19 x 3.5 in) |
Procedure for installing and unpacking the UPS unit.
Detailed steps for hardwiring 5000/6000 VA models.
List of available accessories for the UPS.
Explanation of the UPS front panel display and indicator lights.
Details on cold start, self-test, voltage diagnostics, and battery operation modes.
Procedure for replacing the UPS battery module(s).
Steps for disconnecting the battery for shipping compliance.
Solutions for common UPS installation and operation problems.
Details of the product's limited warranty terms and conditions.
Details on agency approvals and radio frequency warnings.
To Next Page