Apeks wtx series - Harness Hardware Details; Retaining Loops for Straps and Accessories; Epaulets and SOLAS Reflector Devices; Heavy Duty Metal Waist Buckle

8 WTX Series Owner’s Manual
Below each of the shoulder release buckles,
there is an elastic retainer loop. These loops
can be used to retain excess shoulder strapage
or they can be used to retain an accessory
such as a small ashlight. There is also a
retainer loop located on the crotch strap to
retain excess strapage.
On top of each shoulder are epaulets that hold down
the airway(s). Not only do these epaulets hold down the
airway(s), they are also SOLAS reector devices for high
visibility. The epaulets are removable and can be reposi-
tioned to a new location based upon your needs.
The waistband on the WTX Harness is secured in front with
a heavy-duty metal waist buckle. The metal buckle can be
positioned on either side of the waistband allowing for either
a left hand or a right hand release.
Retaining Loops
Epaulets (Hold-downs)
Heavy Duty Metal Waist Buckle