Apeks wtx series User Manual

14 WTX Series Owner’s Manual
ASSEMBLING YOUR WTX SYSTEM
Note: The terms “hook,” “loop,” and “hook & loop” are used
throughout this manual. Hook & Loop is commonly known as
Velcro®, which is a trademarked brand of hook & loop. Many
of the BC’s components have hook & loop attachments,
including the waistband, cylinder bands, and weight pouch aps.
Mounting a Single Cylinder Buoyancy Cell
Using Dual Tank Bands
A single cylinder buoyancy cell may be attached directly to an
Apeks back plate or the WTX harness using dual tank bands.
1. Identify the series of four slots at the
top and bottom of the Apeks back plate
that accommodate the tank bands.
Mounting Directly to the Back Plate
1 2 3 4
2. While viewing from the back, insert
the upper tank band through the upper
left slot in the buoyancy cell and on
through slot 1 in the back plate. Make
sure that the hook and loop of the tank
band are facing outward.

Apeks wtx series Specifications

General

Brand	Apeks
Model	wtx series
Category	Diving Instrument
Language	English