Apeks wtx series User Manual

6 WTX Series Owner’s Manual
FEATURES
The back pad in the WTX harness
is considered optional and can be
removed. It is held in place by simple
hook and loop.
Apeks’ harnesses, buoyancy cells and accessories are fully mod-
ular. They can be mixed and matched to create the ideal system
for you and the type of diving you choose to do. In addition, it is
easy to customize your system by adding or changing out various
pieces of hardware. Whether you want a travel friendly rig to dive
in the tropics or a solid technical rig to dive deep, Apeks has the
right buoyancy conguration for you.
WTX Harness
Removable Back Pad
If desired, the WTX harness gives the option of inserting an
Apeks back plate for additional weight or support. If you are
using nuts and bolts to attach a cylinder or cylinders to the WTX
harness, then a back plate must be used.
A quick and easy way to attach a single cylinder to the WTX
harness is the use of dual nylon tank bands. The bands can be
run directly through the back of the harness with or without a
back plate installed.
The 2-inch webbing on the shoulders of the WTX harness is
an open design. While the WTX harness comes with a 2-inch
angled D-ring on each shoulder, the shoulder can be opened up
to change out or add additional hardware.
Back Plate Allowance
VERSATILITY THROUGH MODULARITY
Dual Tank Band Capability
Open Shoulder Design

Apeks wtx series Specifications

General

Weight pockets	Optional
Series	WTX
First Stage	Not applicable
Second Stage	Not applicable
Maximum Operating Depth	Varies by configuration
Weight	Varies by configuration
Cold Water Performance	Suitable
Butt Plate	Optional
Environmental Sealing	No