10 WTX Series Owner’s Manual
Each single cylinder buoyancy cell comes standard with a
lower left pull dump. This easy-to-reach dump is convenient
when dumping while inverted.
The Apeks technical airway found on each cell includes a
corrugated hose that has an elliptical cross section. This al-
lows for a lower prole, which reduces drag and lays cleanly
over the shoulder.
A safety cable can be found in the corrugated hose of each
Apeks technical airway. This safety cable protects the cor-
rugated hose from hyperextension and tearing that can be
caused by any undue stresses such as snags.
Technical diving equipment must be robust and reliable.
Apeks’ new technical inator exceeds the challenge. The
secret to its reliability is its simplicity. Fewer parts mean less
to go wrong and ease of service. Once you hold the precision
marine brass buttons in your hand, you will quickly realize
that this is not a recreational inator, but rather a serious tool
to meet the dive at hand.
Twin Cylinder Buoyancy Cells
Twin cylinder buoyancy cells have
three grommets near the top of the
center panel and a corresponding
oval grommet near the bottom of the
center panel. The three grommets al-
low the diver a choice of three height
adjustment settings to achieve proper
trim of the cell. Rather than have the
lower bolt line up perfectly with a
lower hole as other brands require,
the oval grommet accomodates bolts
that are slightly out of position.
Multiple Grommets for Nut and Bolt Attachment
Lower Left Pull Dump
Elliptical Corrugated Hose
Safety Cable in the Airway
Heavy Duty Inator with Brass Buttons
To Next Page
Loading...
