A1 36 DTR.APC.APR.ALW.03
(ENG)
LCD2 DP_________ (The process variable point position on LCD2)
| \
|
BACK (Return to Local Menu. If you will confirm this option,
| | you will come back to main tree of Local Menu)
| |
| | (Confirm one of the following option across
| | longer press button . After parameter confirmation
| | transmitter will confirm the party of command by the "DONE")
| |
| XXXXX•
| |
| XXXX•X
| |
| XXX•XX
| |
| XX•XXX
| |
| •XXXXX
|
FACTORY________ (Come back to factory setting)
| \
|
BACK (Return to Local Menu. If you will confirm this option,
| | you will come back to main tree of Local Menu)
| |
| | (Confirm the command as bellow across longer press
| | button . After parameter confirmation transmitter will
| | confirm the party of command by the "DONE")
| |
| RECALL
|
|
RESET____ (The program enforcement of the transmitter restart)
\
BACK (Return to Local Menu. If you will confirm this option,
| you will come back to main tree of Local Menu)
|
| (Confirm the command as bellow across longer press
| button . After parameter confirmation transmitter will
| confirm the party of command by the "DONE")
|
RESET
for transmitters with the display in accordance with EN 12405-1 (MID)
MID_WP_**________ (Lock modify the parameters associated with MID)
| \
|
BACK (Back to the Local Menu. If you approve this option,
| | return back to the main menu Tree Local)
| |
| | (Submit one of the following through constant
| | pressing. Once approved, the parameter transmitter
| | will confirm receipt of the command message "DONE")
| |
| |
| ON (Lock Activation parameters affecting the metrology)
| |
| OFF (Turns lock parameters affecting the metrology)
**) for transmitters since 2011
To Next Page
Loading...
