1082 Smart Switch Operation Manual
CHA-1082-8000/11
__________________________________________________________________________________________________________
__________________________________________________________________________________________________________
Page 37 of 48
MDL=1019D
Backlight
MDL=1019D
Backlight ON
3.9.2 Backlight
Configure Smart Switch L.C.D. backlight operation: -
Fig. 36
Press to return to previous tier sub menu option “Backlight”. Press to select Smart Switch
backlight ON (enabled) or OFF (disabled) when a selection key is pressed.
NOTE:
- Fig. 36 beacon model for example only.
4. Firmware Upgrade
The Smart Switch firmware is field-upgradeable. The firmware loader resides in Smart Switch
protected memory and cannot be overwritten. Hence, if a failure occurs during a Smart Switch
firmware upgrade, i.e. a power interruption, the update process can simply be repeated.
See Appendix C for firmware update instructions.
5. Battery Replacement
In due course, rechargeable batteries will require replacement. Return the Smart Switch to Applied
Acoustic Engineering for battery replacement.
6. Product Recycling / Disposal
Within the EU all electronic components and batteries must be taken for separate
collection at the end of their working life under EU WEEE directives. Applied Acoustics
as a manufacturer within the EU will responsibly dispose of any returned end of life
Applied Acoustics components / batteries through a registered WEEE scheme. In
order to prevent uncontrolled waste disposal and promote re-cycling please return any
end of life Applied Acoustic components postage paid by sender to our UK head
office. Please contact Tech Support for a RMA number prior to shipping.
Select ON or OFF.
To Next Page
Loading...