Aprilaire 8840M - CONFIGURE DISPLAY SETTINGS

THERMOSTAT OPERATION
DISPLAY SETTINGS
The Display Settings are used to configure
the intensity of the screen’s backlight as
well as the screen saver options.
1. Touch Menu to open the Menu screen.
2. Touch Display Settings to open the
Display Preferences screen.
3. Touch Display Brightness to change
the intensity of the screen’s backlight.
4. Touch the or arrows to
change the setting. The default setting
is 80%, and the range is 50% to 100%.
5. Touch Done to save any changes.
Touch Back to discard your changes.
6. Touch Screen Saver to open the
Screen Saver Settings screen.
7. Select your preferred screen saver
option.
8. Touch Done to save any changes.
Touch Back to discard your changes.
14
4
7
3
6
1
2
5
8