STATUS
A thermostat can have up to 4 Support
Modules, each with its own set of
configured sensors. Support Modules
can have either 1 temperature sensor, 2
temperature sensors, or 1 temperature
and 1 humidity sensor. A (C) indicates
that a sensor value is a Controlling
value. The thermostat is controlling the
room temperature or humidity based
on this value. An (M) indicates that a
sensor value is a Monitored value and is
displayed for information purposes only.
The thermostat does not respond to
changes in Monitored values.
Sensors can be renamed to help you
identify the location of each.
3. Touch Edit to activate the sensor
rename boxes. Touch the sensor box
associated with the sensor you want
to rename. Type the new sensor name
and touch Done when finished. Touch
Cancel to return to the Monitored
Climate screen without saving any
changes.
4. Touch Done to save the sensor names.
Touch Back to discard any changes.
23
3
4
To Next Page
Loading...
