© Ikonix USA
69
Execution Time Restrictions
The following commands require a higher amount of processing time which may be higher than the rest
of the commands list. Allow the listed “Execute Time” as the minimum time in order to successfully execute
the command.
COMMAND TIMING LIST
Command Execute Time
<normal setting command> <60ms
<normal qurey command> <20ms
MANual:FILE:ADD
LIST:FILE:ADD
STEP:FILE:ADD
PULSe:FILE:ADD
<250ms
MANual:FILE:LOAD
LIST:FILE:LOAD
STEP:FILE:LOAD
PULSe:FILE:LOAD
<300ms
LIST:SEQ:ADD <80ms
SYSTem:[:LIMit]:VOLTage[:AC]:HIGH
SYSTem:[:LIMit]:VOLTage[:AC]:LOW
SYSTem:[:LIMit]:VOLTage:DC:HIGH
SYSTem:[:LIMit]:VOLTage:DC:LOW
SYSTem:[:LIMit]: FREQuency:HIGH
SYSTem:[:LIMit]: FREQuency:LOW
<(300ms*file number)
SYSTem:FACTory:DEFault 10s
To Next Page
Loading...
