AquaLab 10 DUO OPERATION (OPTIONAL)
4. Scroll down to Defaults and press the Enter icon button to
restore to defaults. To cancel and return to the Main menu,
select the Cancel icon. After selecting the Enter button, the
system will prompt you to reset the defaults.
5. To restore the original model settings, press the Check icon. To
cancel and return to the main menu, press the Cancel button.
After pressing the Check icon, a Calibration screen will confirm
the restoration of your factory calibration.
6. To return to the main menu screen, select the Check icon.
59
To Next Page
Loading...
