AquaLab 5 MENUS
5.2 Configuration Tab
When at the configuration screen, pressing the up and down arrow
keys moves the cursor through the various configuration options.
Press the left and right arrows to page through the options. The
Enter button will allow you to change the highlighted setting.
Calibration
Pressing the Enter button with Calibration highlighted starts the
calibration process. For more details on the water activity verifica-
tion and calibration procedures refer to Chapter 7. Refer to Chapter
10 for moisture content verification information (DUO model only).
You may also reset the calibration to the factory defaults by high-
lighting the Defaults option and pressing Enter. This will reset all
options to the way they were when the instrument arrived at your
location.
17
To Next Page
Loading...
