10 DUO OPERATION (OPTIONAL) AquaLab
10.7 How to Delete Models
If you find that a model is no longer needed, you have the option
of deleting the model directly from the instrument. If the model is
deleted, other users will no longer be able to use it. Also, if the model
has not been backed up with AquaLink 4, you will not be able to
recover the model at a later time.
1. Navigate to the calibration screen in the Configuration menu
of the AquaLab Moisture Analyzer and select %Moisture from
the list of calibration types.
Note: If you do not see %Moisture as an option you may not
have a DUO model or you may not have any models installed.
2. Scroll down to Delete and press the Enter button.
3. Select the model you would like to delete and press the Enter
icon button to continue or the Cancel icon button to cancel.
60
To Next Page
Loading...
