Aquatec orca - Page 11

Setup
1.
PlacetheseatBonthebottomoftheemptybathtub.Ensure
thatthespindlefootretainerCispointingtowardstheend
ofthebathtuboppositethedrainA.
2.Foldthesideflapsoftheseatoutwards.
3.
PlacethebackrestA(withoutthehandcontrol)ontothe
seatsothatthehooksBofthebackrestfitintothehinges
CoftheseatplateD.
IMPORTANT!
Riskofdamage
Damagetotheproductcausedbythespindlefoot
slippingout.
–Ensurethatthespindleisfullyretractedandthe
spindlefootislevelandnottwisted,beforefolding
upthebackrest.
–Oncethebackrestisfoldedup,ensurethatthespindle
footisinthespindlefootretainer.
1574469-A
11