1-13
Table 1.5 - Supplemental Characteristics (continued)
____________________________________________________________________________
TYPE DESCRIPTION
____________________________________________________________________________
Increase/Decrease Value
Modification
UP and DOWN ARROW keys are used to increase or decrease,
respectively, the displayed value. The rate of modification may be
increased by depressing the UP or DOWN ARROW key and
depressing the NORMAL key (or the opposite ARROW key).
Successive presses of the NORMAL key (or the opposite ARROW
key) continue to increase the rate of modification.
Output Control 2 keys with LED indicators select either the Standby - STBY (no
output) or Operate - OPER (output active) modes.
Synchroscope Control
1 key with an LED indicator sets either 0° or 180° phase-shift
between the main and aux. voltage outputs for verification of
synchroscope operation. Successive presses of the
SYNCHROSCOPE key will toggle the outputs between 0Ê and
180Ê as indicated on the display.
User Memory Control 3 keys control memory operation. The CLEAR key clears all user
memory. The STORE key stores the displayed instrument settings
sequentially into memory. RECALL sequentially recalls the stored
instrument settings onto the display. The output will remain in
Operate state provided the recalled function setting and range are in
agreement with the previous setting. RECALL will never change
the output from Standby to Operate.
Memory Capacity 50 Values: The STORE LED will be illuminated if there are any
stored settings. Memory Full is indicated by a flashing STORE
LED.
Warning Indicators 2 large red LED indicators warn of HIGH VOLTAGE or
OVERLOAD conditions.
GPIB Indicators 4 green LED's: SRQ, RMT, LSN and TLK indicate GPIB bus
activity.
To Next Page
Loading...
Need help?
General