Arbiter Systems 1040C - Table 1.2 - Voltage Specifications

1-6
Table 1.2 - Voltage Specifications *
____________________________________________________________________________
TYPE DESCRIPTION
____________________________________________________________________________
I. Output, + DC Voltage
Range 1 10 mV to 105 mV
Range 2 0.1 V to 1.05 V
Range 3 1 V to 10.5 V
Range 4 10 V to 105 V
Range 5 100 V to 1050 V
+DC Voltage Amplitude +(0.2% of reading +0.05% of full Accuracy scale)
Burden 15 mA on all ranges
Overload Set Point 25 mA
Noise 0.25% rms of reading Max, 10 kHz BW
Voltage Output Stability <(0.03% of reading +0.015% of full scale);
Averaged for 1 minute or longer.
Settling Time <8 seconds
II. Output, AC Voltage
Range 3 1.5 V rms to 15.75 V rms
Range 4 15 V rms to 157.5 V rms
Range 5 150 V rms to 750.0 V rms
* Utility Version Specified at Output Connectors