Arcam AVR400 - Page 32

E-30

CD Device Mode
e
c
Device Mode button congures the CR102
to control the CD functions of Arcam CD players,
although this can be changed (see page E-25). Pressing this
button also selects CD as the AVR400 source.
P
Toggles power between standby and on.
0
…
9
Functions as original remote number key.
PHONO
E
Selects Display input on the AVR400.
RPT
r
Toggles random (‘shue’) play on and o.
SHIFT +
r
cycles through the repeat
options (track, disc, etc.).
S
Modies many keys (see individual key
descriptions, below)
AUX
H
Selects multichannel (
MCH) input on
AVR400.
SHIFT +
H
selects AUX input on the
AVR400.
NET
e
Selects
IPOD input on AVR400.
SHIFT +
e
selects network (NET) internal
input on the AVR400.
Navigates track listings if supported by the
player.
OK selects the currently highlighted track if
supported by the player
M
Changes the time display modes on Arcam
CD player
U
(not used)
D
Cycles through the front panel display’s
brightness options.
SHIFT +
D
enables RPT AB functionality if
supported by the player.
@
Toggles the mute function. By default this
key operates the AVR400 Mute.
]
Press and release to skip back to the
beginning of the current/previous track.
[
Press and release to skip forwards to the
beginning of the next track.
- +
Decrease (
) and increase (+) AVR400
volume.
)
Fast rewind
$
Play
&
Toggles pause of playback
(
Fast forward
!
Open/close disc tray
#
Stop playback
%
Start recording (on products that have this
feature)
h
Scans rst 10 seconds of each track on CD,
if supported by the player (Audio search)
FAV+
u
Starts Program mode
FAV-
t
Clears programmed item
HOmE
o
(not used)
INFO
b
(not used)