ARCCAPTAIN MIG200 - Transportation and Storage

33
output and
error code
There are gas
supply and
current output
but no wire
feeding after
pressing torch
trigger
●Wire feeding unit is stuck
●Wire feeder fails
●Control board in the welder fails
● Unblock the wire feeding unit
● Repair the wire feeder
● Ask professional personnel for help
Welding
current is
instable
●Unsuitable moment adjustment
for wire feeder
● Wire feed rolls do not match
welding wire
● Contact tip is worn severely
● Wire liner of torch is worn
severely
●Welding wire is of poor quality
● Readjust moment of wire feeder
● Select suitable wire feed rolls and welding wire
● Replace the contact tip of torch
● Replace the wire liner
● Replace wire with one of better quality
2) Spare Parts List for Maintenance
No.
Material Code
Name of Material
1
10050332
IGBT SGT40N60NPFDPN
2
10043957
Rectifier tube SFR25U20PN
3
10037137
Electrolytic capacitor CD-1500uF-200V
4
10069363
Relay QX90ASDC24VCFR
5
10006278
MOSFET 2SK3878
6
10066303
Integrated circuit UC3525AN
7
10033188
Integrated circuit UC3844B
8
10075418
Diode SFR20S20T
9
10075332
Integrated circuit OP2177
10
10075308
MOSFET SVT06130NDTR
11
10075093
DC fan RS8025S24SH-A
14. TRANSPORTATION AND STORAGE
Transportation
Equipment should be handled with care in transportation to avoid severe impact. Equipment should be
protected from damp and rain in transportation.
Storage
Temperature for storage: -25℃~+50℃
Humidity for storage: relative humidity≤90%
Storage life: 12 months
Place for storage: ventilated indoor place without corrosive gas