Adaptive Crater: No need manual adjustment.
Burn Back Adjustment: softwire could automatically set burn-back time and voltage at MIG.
Suitable for complex working environment: LED light in the feed wire house, could easily check wire
or roller.
4. PERFORMANCE CHARACTERISTICS
Advanced IGBT Inverter Technology
Inverting frequency of 43 KHz greatly reduces the volume and weight of the welder.
Great reduction in copper and iron loss obviously enhances the welding efficiency and energy
saving effect.
Switching frequency is beyond audiorange, which almost eliminates noise pollution.
Leading Control Mode
Advanced digital control meets requirement of welding process and greatly improves the welding
performance.
It is applicable to welding wire with diameter of 0.023-0.040 and different grades, and electrode of
acid or basic.
Easy arc ignition, less spatter, stable current, nice shape, etc.
Cooling fan on demand prolongs its service life by stopping working during no load.
Nice Shape and Structure Design
Front and rear panels in shape of streamline make the whole shape nicer.
Large LED digital display: Read data easily.
Panel made of strong engineering plastics ensures high efficiency of the machine in severe
conditions such as high impact, drop down and so on.
With complete and closed air passage, welding machine can pass metal dust test with dust of 25 kg
in 1 hour during normal operation.
With complete and reliable structure, welding machine can pass HF vibration test from three
directions in the condition of 6G acceleration and 0. 079-inch displacement.
To Next Page
