Hot workpiece can cause severe scald.
·Do not touch hot workpiece with bare hands.
·Cool the welding torch for a while after continuously working.
Excessive noise does great harm to people’s hearing.
·Wear ear covers or other hearing protectors when welding.
·Give warning to onlooker that noise may be potentially hazardous
to hearing.
Magnetic field can make cardiac pacemaker a bit wonky.
·People with cardiac pacemaker should stay away from the
welding spot before consulting their doctor.
Moving parts may injure your body.
·Please keep away from moving parts (like fan).
·Each door, panel, cover, baffle plate, and protective device the like
should be closed and located correctly.
Seek professional support when trouble strikes.
·When trouble strikes in installation and operation, please inspect
according to related contents in this manual.
·If you still cannot understand fully, or you still cannot solve the
problem, please contact the dealer or the service center of our
to obtain professional support.
Replacing the components can be dangerous.
Only professionals can replace the machine components.
Make sure there is nothing left such as wire leads, screws, gaskets and metal bars in the machine
when replacing the components.
Make sure the internal connection of machine is correct after replacing the PCBs, and then the
machine can be operated. Otherwise, machine may be damaged.
Precautions for scrapping
Pay attention to the following when discarding the welding machine:
Burning the electrolytic capacitors in the main circuit or on the PCBs may cause an explosion.
Burning plastic parts like front panel will result in toxic gases.
Dispose the machine as industrial waste.
To Next Page
