To Next Page
D
Debra NicholsSep 9, 2025
What to do if the ribbon is out on my Argox Barcode Reader?
- DDestiny VincentSep 9, 2025
If the ribbon is out on your Argox Barcode Reader, supply the ribbon roll.
What to do if the ribbon is out on my Argox Barcode Reader?
If the ribbon is out on your Argox Barcode Reader, supply the ribbon roll.
What to do if the label stock is out on my Argox Barcode Reader?
If the label stock is out on your Argox Barcode Reader, supply the label roll.
How do I fix a ribbon sensor error on my Argox Barcode Reader?
To fix a ribbon sensor error on your Argox Barcode Reader, replace the ribbon sensor.
What to do if the label stock is not installed on my Argox Barcode Reader?
If the label stock is not installed on your Argox Barcode Reader, install the label roll.
Steps to check the printer for shipping damage and verify contents.
Guide on how to safely connect the printer to a power source.
Detailed instructions for installing a ribbon roll into the printer.
Procedures for loading various types of media rolls into the printer.
Steps for calibrating and configuring printer settings for optimal performance.
Procedure to revert the printer's settings to their original factory state.
Step-by-step installation guide for the USB printer driver using Plug and Play.
General instructions and recommendations for installing the printer driver software.
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Resolution | 203 dpi |
| Model | OS-214 Plus |
| Print Width | 104 mm |
| Memory | 8 MB Flash |
| Processor | 32-bit RISC |
| Interfaces | USB, Serial (RS-232), Parallel |
| Type | Barcode Printer |
| Supported Barcodes | Code 39, Code 128, UPC-A, UPC-E, EAN-13, EAN-8, Interleaved 2 of 5, Codabar |
| Operating Voltage | 100-240VAC, 50-60Hz |
| Print Speed | 4 ips (inches per second) |
