Argox X-2300 - LED Indicators

33
The front panel includes:
 3 LED indicators (READY, MEDIA and RIBBON)
 3 buttons (FEED, PAUSE and CANCEL)
 LCD display (except X-1000VL)
 Top Access Door
 Front Access Door
LED Indicators
There are three LED indicators on the front panel - READY, MEDIA
and RIBBON. These indicators display operation status of the
printer.
READY
On – Normal operation
Off – Error conditions including ribbon out, media
out, print tasks cancelled, printing errors, printer
paused, printer receiving data
MEDIA
On – Normal operation
Blinking – Media is used out; install new media.
Print head overheat (LCD will indicate “Print Head
Heat”; printer will resume printing automatically
later.)
RIBBON
On – thermal transfer mode with ribbon installed.
Off – direct thermal mode with no ribbon installed.
Blinking – Ribbon is used out; install new ribbon.
For the X-2000V / X-2000V Zip / X-2300 / X-2300Z /
X-2300E / X-2300ZE / X-3200 / X-3200Z / X-3200E /
X-3200ZE models, modes of thermal transfer and