Argus Mi-TICS - Heat Seeker and Cold Seeker; Application Modes

 Avon Protection 39 DAS775571AA Version 9, December 2015
GR 13313 CR121804
6.7 Heat Seeker and Cold Seeker
Check the “Heat Seeker” box, “Cold Seeker” box or “Heat and Cold Seeker” box to enable
trackers. Check the Tracker Temperature box or Spot temperature box, then click the
‘Save Changes’ button. Eject the camera from the charger dock. Do not switch the camera
off and back on again. The new settings will be enabled.
6.8 Application Modes
Check the application modes to be enabled, then click the ‘Save Changes’ button. Eject
the camera from the charger dock. Do not switch the camera off and back on again. The
new settings will be enabled.