4.6 Initiating and Completing an X-ray Exposure
yellow
To begin the exposure, press and hold the trigger. The
READY
message
is replaced with
X-RAY ON
, the green LED is replaced with a yellow LED,
and there is an alert tone ;Òfor the duration of the exposure.
To ensure complete exposure, keep the trigger depressed until the
audible tone ;Òis complete, the yellow LED is off, and
X-RAY COMPLETE
briefly displays.
NOTE: An exposure can be prematurely terminated for any reason by
abruptly releasing the depressed trigger.
4.7 Power Off
Press and release the
Power
button to turn NOMAD Pro off.
NOMAD Pro also automatically shuts off after approximately 3 minutes
of inactivity.
The NOMAD Pro display darkens, accompanied by a tone ;Òto indicate
shutdown.
To Next Page
Loading...
