4.9 Settings Menu
NOMAD Pro menus allow the operator to customize settings according to individual preferences. To
access the
Main Menu
, press and hold down the
Select
(
) button for 3 seconds. When the
Main Menu
appears, the operator can access the desired Menu item(s) by pressing the
Increase
(
) and
Decrease
(
) buttons to scroll up or down. When the desired Menu item is highlighted, press the
Select
( )
button to access the Menu item.
Within the Menu items there are options (such as
YES
and
NO
which are selected using either the
Increase
(
) or
Decrease
( ) buttons. Once a selection is made, pressing the
Select
( ) button
confirms the choice.
To exit the
Main Menu
, highlight
EXIT
at the bottom of the list and then press the
Select
(
) button, or
power the device off and then on.
SYSTEM INFO
When system information is selected from the settings menu the device software
version information will be displayed on-screen. Pressing the
Select
( ) button
will return the operator to the Settings menu.
AUDIBLE SOUND
The volume may also be adjusted by the operator. The range is from 1 (softest),
up to 5 (loudest). The
Increase
( ) or
Decrease
( ) buttons are used to adjust
the volume, and the system emits a tone as each volume is selected so the
operator can determine the choice. Once the desired volume is determined,
pressing the
Select
( ) button saves the volume setting.
RESET DEFAULTS
[Technique
Factors and Trip
Counter]
The operator can use the
Increase
( ) or
Decrease
( ) buttons to toggle
between
YES
and
NO
in response to the menu prompt
RESET EXPOSURE TIME TO
FACTORY SETTINGS?
If
YES
is selected, the system will confirm the selection by displaying
ALL CUSTOM
SETTINGS WILL BE ERASED. ARE YOU SURE?
Selecting
YES
and then the
Select
( ) button reverts any any customized
exposure settings to the factory defaults and returns the device to the
Main Menu
.
If ever
NO
is selected and then the
Select
( ) button pressed, the customized
settings will not be changed and the system returns to the
Main Menu
.
To Next Page
Loading...
