ARIBEX Nomad Pro Veterinary - 1 Getting Started; Intended Use; Unpack, Check, and Register NOMAD Pro System

OPERATOR MANUAL..
1
1.0 Getting Started
1.1 Intended Use
The NOMAD Pro Veterinary X-ray System is designed to be used for veterinary medicine by trained
veterinary professionals for producing diagnostic dental
X-ray images.
1.2 Unpack, Check, and Register NOMAD Pro System
n Unwrap individual components from the protective
plastic and check for any noticeable signs of damage.
The standard package system includes the following
items:
¾ NOMAD Pro Device
(08500049)
¾ 2 Handsets (08500056)
¾ Charging Cradle (08500060)
and the AC/DC Power Supply
(08500070)
¾ Certificate of Conformance, Getting Started guide (08500305), Warranty /
Registration Card, and NOMAD Pro Operator Training CD (08500304)
o Preliminary Checks:
Item Check
Device Labels
Verify that the serialized Device label is in place (located on lower side of unit).
Other Labels
Verify that the serial number on the Warranty/Registration card matches the device serial
number and the device serial number on the carrying case. Verify that the Handsets label
(located on the top of each Handset) and the Charging Cradle label (located on the bottom of
the Charging Cradle) are all in place.
Collimator Cone and
Backscatter Shield
These two items provide operator protection and should be inspected for shipping damage.
Trigger Switch
Should freely move in and out when depressed and released.
Device Housing
Should be free of cracks or fractures.