Ariston ELIOS 25 - Parameter P9: Recooling Function

33
Plant ƀow rate expressed in litres/minute
Data Regulation range Default
FLO9 OFF .. 2. l/min. 2.3 l/min.
P9: RECOOLING FUNCTION
This function permits to automatically reduce the boiler
temperature.
This parameter permits to set the data concerning the
management of the automatic cooling function of the boiler.
The icons of ‘pump’ and ‘sun’ ƀashing on the display will
indicate that the manifold pump cooling the boiler has been
activated.
The Recooling function will be activated if the RCEN parameter
is 1 whereas it will be deactivated if the parameter is .
If the parameter is not activated in the selected scheme,
the message ‘ NONE ‘ will appear on the display.
PRESS ‘  ‘ TO C*AN)E T*E SELECTED PARAMETER;
T*E PARAMETER 9ILL START $LINKIN).
j
PRESS ARRO9S ‘ S ‘ and ‘ T ‘ TO SET
T*E DESIRED 8ALUE (for ‘ FLO9 ‘ parameter only).
j
PRESS T*E ‘  ‘ KEY TO CONFIRM T*E
PRO)RAMMIN) OR PRESS T*E ‘ esc ’ KEY TO CANCEL
T*E C*AN)ES.
AFTER SELECTIN) PARAMETER P PRESS
T*E ‘  ‘ KEY.
j
PRESS ARRO9S ‘ S ‘ or ‘ T ‘ TO CYCLICALLY SCROLL
T*E RECOOLIN) FUNCTION PARAMETERS:
Recooling Temperature ‘ TR ‘
Recooling Temperature Differential ‘ ţTR ‘
Recooling function enabling ‘ RCEN ‘
j