Aritech Advisor MASTER ATS4000 - 3. ZONES IN ALARM; To list all zones in alarm

24 ATS4000 Manager’s Guide
3. Z ONES IN ALARM
Use this function to list all zones that are in alarm.
Alarms must be acknowledged and reset. See the section What to do when there is an
alarm on page 16.
To list all zones in alarm
1. Access menu option 3.
What happens next depends on whether there are zones in alarm:
No zones in alarm Zones are in alarm
Zones in alarm are listed either one at a time, or
as a list of numbers:
or
2. From the display you can now:
Option Action Result
Display the
complete zone
name
Enter the zone
number and press
[ENTER]
Display the complete zone name.
(Excludes the status No alarms).
Update the list
Press [NEXT]
Update the list of zone status.
Exit
Press [ENTER]
Exit the menu option.
✍ Tamper alarms are identified by T preceding the zone number.
See also: Types of alarms
Menu option 1, Panel status
What to do when there is an alarm
No Alarms
Press ENTER
Alarm On 3, Fire Escape Doo
r
NEXT or ENTER
A
larm On 1, T2, 6.
Zone No:
Intelligent Security & Fire Ltd.