48 ATS4000 Manager’s Guide
Option Action
Enable the Service Technician's code for the
programmed timeperiod, and return to the menu.
Press 1 and [ENTER].
Cancel the Service Technician's code, and return to the
menu.
Press 0 and [ENTER]
Return to the menu.
Press [ENTER]
18. R
ESET CAMERAS
Use this function to reset the film frame count on a camera to zero, or to change the
frame count number on an individual camera. This is done when you have changed the
film in a camera.
To reset the cameras
1. Access menu option 18.
The display shows:
2. Do one of the following options:
Option Action
Reset the frame count for all the cameras to zero.
Press 0 and [ENTER].
Display the present count for the selected camera.
e.g.
Enter the present
count for the selected
camera and press
[ENTER]
Return to the menu.
Press [ENTER]
3. If you have selected to display the present frame count, enter the new frame count
and press [ENTER] to return to the original camera counts display to allow zone of
another camera number, or
Press [ENTER] to return to the menu.
20. D
OOR AND
F
LOOR GROUPS
Use this function to select and program door and floor groups.
Each door group contains a list of all doors (64 doors) and the timezone for each door
within the group. Each floor group contains a list of all floors (64 floors) and the timezone
for each floor within the group. Authorised access is only valid during the timezone.
Reset Camera Counts 0-All
Camera No:
Film Counts 1:0123
Film Count:
Intelligent Security & Fire Ltd.
To Next Page
Loading...
