Aritech Advisor MASTER ATS4000 - Door groups: (if you selected option number 1)

ATS4000 Manager’s Guide 49
To program door and floor groups
1. Access menu option 20.
The display shows:
2. Select the option you want to access (1 for door groups, and 2 for floor groups), and
press [ENTER], or
press only [ENTER] to return to the menu.
Door groups: (if you selected option number 1)
1. The display shows:
Enter the door group number and press [ENTER] to move to the next display, or
press only [ENTER] to return to the initial display ("Groups, 1-Doors 2-Floors”).
2. The display shows.
e.g.
Enter the door number (e.g. 3) and press [ENTER] to move to the next display, or
press only [ENTER] to return to the previous display ("Door groups”).
3. The display shows the details of four doors starting with the door number selected.
(See Note on page 57 for details of this display)
e.g.
Do one of the following options:
Option Action
Disable the door for this door group.
Press [MENU*]
Enter the timezone number and return to step 2. Enter the timezone
number and press
[ENTER]
Return to step 2.
Press [ENTER]
Important! Always remember to update your "Door Group" List when any changes are
made.
Groups, 1-Doors 2-Floors
Option:
Door Groups
Group No:
Door Grp 1 D1-00 D2-00 D3-** D4-**
Enter Door:
Door Grp 1 D3-** D4-** D5-03 D6-00
*-Dis,Tz-D3:
!
Intelligent Security & Fire Ltd.