30 ATS4000 Manager’s Guide
To request the service menu
1. Access menu option 7.
The display shows:
2. Enter your PIN code
3. Press [ENTER].
The display shows:
4. Enter the service option number required (see table above) and press [ENTER].
In some cases this will bring up another display for more information to be entered:
Option Procedure
Request service
technician
Press 1 and [ENTER]. The display shows:
The control panel then sends a "Service Requested"
message to the central station.
Then press:
- 1 and [ENTER] to confirm request for service
technician, or
- 0 and [ENTER] to return to the menu, or
- [ENTER] to return to the menu.
Dial management
software
Press 3 and [ENTER]. The display shows:
Then press:
- 1 and [ENTER] to confirm that the control panel dials
the management software, or
- 0 and [ENTER] to return to the menu, or
- [ENTER] to return to the menu.
Code Required
Code:
1 - Request Service Technician
0-Exit, Menu:
1-Confirm Request Service Technician
0-Exit, Menu:
1-Confirm Dial
0-Exit, Menu:
Intelligent Security & Fire Ltd.
To Next Page
Loading...
