Aritech Advisor MASTER ATS4000 - To create (and change) a user

ATS4000 Manager’s Guide 39
e.g.
4. Press [ENTER]
The display shows the user's floor group.
e.g.
5. Press [ENTER].
If your system is programmed to assign special User Flags to users, the display will
now show the User Flags in sequence. See the section "Create (and change) a user"
for User Flag details.
The display shows the user's name (if any and the user number is 200 or less).
e.g.
6. Press [ENTER]. The display shows the user's PIN code (if any, and if user number is
1000 or less).
e.g.
7. Press [ENTER] to return to step 1.
To create (and change) a user
The procedure to create a user may vary depending on whether you are creating a user
higher than 200 or higher than 1000.
If your system has the ability to program non-ATS format magnetic cards (e.g. credit
cards, financial institution cards, etc.) into the system as users, follow the special
procedure described on page Error! Bookmark not defined., before proceeding with
step 1.
1. Access menu option 14 and press 3 to create a user.
The display shows:
e.g.
2. Select the system user number (card number) and press [ENTER].
The display shows the user's alarm group.
e.g.
Door Group: 2
Press ENTER
Y
our Name is Ann Brown, (*)-End
Ann Brown
Pin Code: 1234
Press ENTER
*-View, Alm Grp:1-No Access
Alarm Group:
Floor Group: 1
Press ENTER
Create Use
r
User No:
Intelligent Security & Fire Ltd.