Arkel ADrive Size-B - Power Terminal Connections; Mains Power Connection Diagram; Brake Resistor Connection Diagram

ARKEL Elektrik Elektronik Ltd. Şti. www.arkel.com.tr
08.2012
ADrive
19
13.1. POWER TERMINAL CONNECTIONS
Symbol Description
L1(R)
Mains inputs
L2(S)
L3(T)
E Earthing terminal.
B Braking resistor transistor output (-)
P DC Bus positive voltage, Braking resistor transistor output (+)
N DC Bus negative voltage (This terminal is located in only ADrive
Size-B and Size-C)
U
Motor outputs
V
W
13.1.1. Mains power connection:
Use a cable with an appropriate cross-section (For more information see section 6)
13.1.2. Brake resistor connection:
Use a shielded cable with an appropriate cross-section (For more information see
section 6)
3-Phase AC Mains Supply
340V-420V, PE, 50/60Hz
L1 (R)
L2 (S)
L3 (T)
PE
3-pole Type B
Circuit Breaker
EMI
Filter
ADrive
Brake resistor
ADrive
AC line
reactor