Arkel ADrive VVVF - 13.1. Power Terminal Connections

ARKEL 101 ADrive
ENGLISH
TÜRKÇE
13.3. POWER TERMINAL CONNECTIONS
Symbol
Description
L1(R)
Mains inputs
L2(S)
L3(T)
E
Earthing terminal.
B
Braking resistor transistor output (-)
P
DC Bus positive voltage, Braking resistor transistor output (+)
N
DC Bus negative voltage (This terminal is located in only ADrive
Size-B and Size-C)
U
Motor outputs
V
W
13.3.1. Mains power connection:
Use a cable with an appropriate cross-section (For more information see Chapter 6)
13.3.2. Brake resistor connection:
Use a shielded cable with an appropriate cross-section (For more information see
Chapter 6)
3-Phase AC Mains Supply
340V-420V, PE, 50/60Hz
L1 (R)
L2 (S)
L3 (T)
PE
3-pole Type B
Circuit Breaker
EMI
Filter
ADrive
Brake resistor
ADrive
AC line
reactor