Arkel ADrive VVVF - Inputs;Outputs on ENCABIT-Plus Module

ARKEL 119 ADrive
ENGLISH
TÜRKÇE
13.2.10. Inputs/Outputs on ENCABIT-Plus module
ENCABIT-Plus module provides an absolute encoder connection as well as 5 digital inputs and 2
transistor outputs. Inputs and outputs are reserved for functions required for synchronous drives.
13.2.10.1. ENCABIT-Plus digital inputs:
ENCABIT-Plus digital input terminals
PI1
Input 1
Mechanical brake release monitoring
(Can be activated in the menu)
PI2
Input 2
Motor & brake resistor temperature monitoring
(Can be activated in the menu)
PI3
Input 3
Manual evacuation mode activation input
PI4
Input 4
Reserved input
PI5
Input 5
Reserved input
24V
+24Vdc reference voltage
Reference voltage for digital inputs
24V
13.2.10.2. ENCABIT-Plus transistor outputs:
ENCABIT-Plus transistor output terminals:
PO1
Transistor output 1
Reserved output
PO2
Transistor output 2
Reserved output
GND
OVdc
Common of transistor outputs
Digital input specifications:
Max. voltage
26Vdc
Clamping range
Max. 1,5 mm
2
Transistor output specifications:
Output type
Open collector
Output voltage
24VDC
Overload protection
Max. 200mA per output
Clamping range
Max. 1,5 mm
2
+24Vdc, max. 100mA
+24V
PO1
PO2
GND