2. EMC CONFORMITY
This product is in conformity with:
- EN 61000-6-2 Generic standards immunity for industrial environments,
- EN 61000-6-4 Generic standards emission for industrial environments,
- EN 55011 Limits and methods of measurement of radio disturbance characteristics of
industrial, scientific and medical (ISM) radio-frequency equipment and
- EN 61000-3-12 Limits for harmonic currents produced by equipment connected to public
low-voltage systems with input current 16 A and 75 A per phase
with the following installation conditions:
● Installing an AC line reactor to the drive power supply input.
● Installing an EMI filter to the drive power supply input.
● Installing a RFI filter to the drive motor output.
● Using shielded cables for motor, brake resistor and encoder connections outside the
device.
To Next Page
Loading...