Arkel ADrive VVVF - 5. TECHNICAL SPECIFICATIONS

ARKEL 89 ADrive
ENGLISH
TÜRKÇE
5. TECHNICAL SPECIFICATIONS
Type
Size-B
Size-C
Size-D
Model
4B055
4B075
4B110
4C150
4C220
4D370
Motor Power (HP)
5.5 kW
7.5HP
7.5 kW
10HP
11 kW
15HP
15 kW
20HP
22 kW
30HP
37 kW
50HP
Nominal Output Current (Inom)
14 A
17 A
26 A
35 A
50 A
75 A
Maximum Output Current (< 6 s)
28 A
34 A
52 A
70 A
100 A
140 A
Input Power Factor (Cos Q)
> 0.97
Input Voltage (V)
AC 3 Faz, 340-420V, 50/60 Hz %5
Output Voltage (V)
AC 3 Faz, 0-400V, 0-100Hz
Control Type
● Closed Loop Vector Control
● Open Loop V/F (for asynchronous drive)
Digital output frequency
resolution
0,004 Hz
PWM modulation method
Space vector modulation
Output wave shape
Sinus
Carrier frequency
10Khz
Encoder type
Incremental
HTL or TTL , 500 – 4096 pulse incremental encoder
Absolute
EnDat, SSI and SinCos absolute encoders
Encoder simulation outputs
● Absolute encoder simulation outputs
● Incremental encoder simulation outputs
Protection
Built-in DC REACTOR (Dc choke)
Input-output isolation
All isolated control inputs and outputs
Cooling
4 low noise fans
Serial communication ports
● RS-485 port for communication with lift controller
● CANbus port for communication with ENCABIT-Plus
Evacuation operation with
back-up power
Control circuit supply
With external 24Vdc feeding
Power circuit supply
● 60-120VDC battery
● 1-phase 230VAC UPS
Special functions for synchronous
drive
● Motor and brake resistor temperature monitoring
● Brake release monitoring
● Manual evacuation mode activating input & special
evacuation screen
Fault history
Last 256 errors
Onboard user interface
2x16 character LC-Display & 5-key keypad
Remote operation
With ADrive Remote Keypad
PC connection
RS-232 port (for ADrive-Win Simulator & Monitor
software)
Saving and transferring
parameters
With Data Key
User interface
2x16 character LC-Display, 5-key keypad
Firmware upgrading
Firmware version V8.00 and later