Arkray Glucocard X-Meter - Navigating Stored Test Results

59
•IfTestAveraginghasbeenturnedon,
the average result will appear first.
Either “14d” or “30d” will show at the
bottom of the screen for either a
14-day or 30-day average. “AVE”
will appear above “14d” or “30d”.
•IfTestAveraginghasbeensetto
“Off”, the display will briefly flash the
number “1” at the bottom of the
screen. Then, the most recent test
result appears with the date and
time of the test.
“MEM” will display at the top of the screen.
This shows it is a stored result.
Step 2: Press the Orange/Up Arrow button to
scroll through memory. Press and hold the Orange/Up Arrow button to
move through the results quickly. Press the Gray/Down Arrow button to
move backwards through results in memory.
mg/dL
mg/dL
mg/dL
mg/dL