60
Step 3: After all test results have been reviewed, “End” appears.
•PresstheOrange/UpArrowbuttononcetogobacktotherstresultin
memory. You can then scroll through results in memory again.
•PresstheGray/DownArrowbuttonfor2secondstoexitMemoryand
turn off the meter. You can exit Memory in this way at any time when
recalling results.
Note:
•Ifnotestshavebeenperformed,oralltestresultshavebeendeleted,the
current date and time appear first, then “End” appears.
•If3minuteselapsebeforeeithertheupperorlowerbuttonispressed,a
beep sounds and the test meter turns off automatically.
To Next Page
Loading...
Need help?
General
