12
Set Up Your System
2. Attach the camera to the wall plate.
If you’re mounting the camera to drywall, be sure to use the included plastic
drywall anchors.
Arlo Go Access and Cloud Storage
The Arlo Go camera is designed to connect to the cellular network. During setup,
the Arlo app uses the cellular network to find your Arlo Go camera so that you can
add the camera to your Arlo account.
After setup, the Arlo Go camera uses the cellular network to send recordings to
the cloud storage associated with your Arlo account.
For best results, NETGEAR recommends placing your Arlo Go camera in a location
where it has at least three bars of LTE signal strength. If your Arlo Go camera is
in an area with consistently low LTE signal strength (two bars or less), you might
experience these problems:
• You are sometimes unable to view your camera live, or the video stream
fluctuates.
• You are sometimes unable to watch recorded videos right away.
• Notifications are sometimes delayed.
• Your battery depletes more quickly than usual because your camera spends so
much time attempting to reconnect to the network.
To Next Page
Loading...
