27
Use an SD Card With Arlo Go
The Devices page displays.
3. Tap or click Settings > My Devices.
A list of cameras displays.
4. Tap or click the camera.
The camera settings display.
5. In the Storage section, tap or click SD Card.
The SD Card page displays.
6. Tap or click Format SD Card.
The SD card is formatted.
Safely Remove an SD Card
It’s important to safely remove the SD card from your Arlo Go camera. If you remove
an SD card while information is being recorded on it, the SD card might become
permanently unusable or the files on the card might be corrupted.
If you remove the SD card that is connected to your Arlo Go camera, SD card
recording is disabled until you insert another SD card.
¾ To safely remove a USB device from your camera:
1. Tap the Arlo icon
on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a
browser.
The Devices page displays.
2. Select Settings > My Devices..
The My devices page displays.
3. Tap or click the camera into which your SD card is inserted.
4. Select Local Storage.
5. Tap or click > next to SD Card.
Note: If you named your SD card using a computer, the name displays instead.
6. Tap or click Safely Eject SD Card.
2
To Next Page
Loading...
Need help?
General
