Arlo Go User Manual

35
Modes, Rules, and Smart Alerts
3. Tap or click the Arlo Go camera.
The Mode page displays.
4. Tap or click a mode to activate it.
The mode that you selected turns on immediately. The mode stays active until
you change it.
When you view the camera feeds, the icons that display at the top of each the
camera feed are based on the currently selected mode.
Motion. Motion detection is on.
Sound. Audio detection is on.
Change Motion Sensitivity
You can easily change the sensitivity level for Arlo Go cameras.
¾ To change the sensitivity level for a camera:
1. Tap the Arlo icon on your mobile device.
You can also enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Mode.
A list of cameras displays.
3. Tap or click the Arlo Go camera.
The Mode page displays..
4. Tap or click Edit
next to the mode.
The Edit Rule page displays.
5. Tap or click Edit
next to the rule that you want to edit.
DRAFT
3
535

Arlo Go Specifications

General

Brand	Arlo
Model	Go
Category	Security System
Language	English